by Richard Miller » Thu Feb 22, 2018 10:45 am
this is from the Corv-8 instruction manual as re-produced by Clarks ,,probably worth buying a copy ,, I refer to it from time to time even tho my car isn't a crown car..
step 6 the shift tube is bolted to trans ,,
7. with trans in reverse position shift knob about 1inch to the left and 1 inch aft of the ignition key .. it then says to mark and drill to bolt crown shift tube to corvair shift tube
I have somewhat shortened the directions here,,but it looks like you start with trans in reverse and go from there ,, Rick Andersen recently replaced his shifter ,, maybe he will enlighten us with more detail
Richard Miller
West Covina, Ca
'65 V8 Vair