Page 1 of 1

1961 Rampside Pro Street Conversion-Sonora, CA

PostPosted: Wed Nov 27, 2019 4:56 pm
by Louisville Lanning
Over 4000 hours in this build and 6 years time and 30K invested. Rotisserie built. Engine is a stroked 350 at 384.5 ci., Pete Jackson gear drive, hyd. roller lifters, roller rockers, stud girdle. Pro Comp alum heads 10.7 compression ratio, 650 Edelbrock carburetor and custom fab headers and exhaust. Royal Purple oils used through out. Evans waterless coolant. Powerglide with a trans brake built to handle 750 HP. Builder is Goodrich Racing Trans out of Malta Idaho. Rear end is a Dana 60 narrowed to 40 inches, 4.10 gears w/ a Power Loc posi. 4 wheel manual disc brakes. 10 gallon fuel cell. 33 x 18.5 Mickey Thompson in the rear and Mickey Thompson front runners up front. Custom Viper Red w/gold pearl and Gold w/gold pearl and fire orange flake belt line. New cab rubber (weather stripping) and new door sill plates come with the truck along with pictures of the build in progress. If you have any questions don't hesitate to ask.

Issue: Small oil leak at rear of intake manifold. Misc oil seepage that cleans up easily after use.
Front coil springs could be longer. (cut too short)
Runs hot (240), needs 4 row radiator and fan shroud. Evans water less coolant boils at 375 degrees so it builds no pressure,
therefore no damage to head gaskets etc.

I need to get started on my next project soon. Make an offer, you might be surprised.

Call James Cox at 209-533-4697 or at slotmachine0143@yahoo.com for details