I am putting the front swaybar back in and having a problem. I replaced the draglink bushings and made sure that I did not upset the adjustment so I could drive the car to get it aligned. I also purchased new swaybar links. The problem is that the bar seems to be too far back for the link to be near vertical. They are pitched back at least 2". The brackets for link on top that bolt to the draglink make it impossible to tighten the link when bolting it to the bar last. I assume the link needs to be installed on the bar and bracket and then the bracket bolted in place but then I do not think I can bolt the bar to the body.
Could the draglink be too far forward with the new bushings?
Larry
65 Crown
65 Monza Convertible
56 T'Bird
67 Grand Prix Convertible